2025 Water/Wastewater Guide
The water sector (water and wastewater) is an important part of modern infrastructure worldwide. This brief listing is meant to showcase products and technology used and specified by civil and structural engineers. If your company should have been included, let us know at gsolo@v1-media.com or jboone@v1-media.com, and we’ll add it online.
BioMicrobics
BioMicrobics is a leader of advanced, decentralized residential, commercial, small community, greywater and stormwater treatment systems. Technologies include the FAST systems, BioBarrier membrane bioreactors, and BioStorm stormwater treatment systems. With more than 80,000 installations in over 80 countries, BioMicrobics solutions are pre-engineered, pre-packaged and scalable. They also efficiently lower the cost of pretreatment, waste management, and onsite sanitation. Using a robust, biological treatment process, BioMicrobics solutions can treat flows from 150 gpd/570 lpd up to 2 million gpd/7,570+ m3/d and are available through a worldwide distributor network.
913-422-0707
CivilGEO
CivilGEO develops civil engineering, water and wastewater management software that efficiently speeds up an engineer’s work. Water distribution and wastewater collection systems can be modeled and designed along with environmental data analysis, assessment and planning. Users typically save at least 50% of their engineering time using the advanced automation the software provides. The software tightly integrates with Autodesk’s Civil 3D, Bentley’s MicroStation, and Esri’s ArcGIS and ArcMap. Free demonstration versions are available for trial.
Sara Presta
sara.presta@civilgeo.com
800-488-4110
www.civilgeo.com
Cretex Specialty Products
PRO-RING is the most advanced concrete-alternative manhole and catchbasin grade-adjustment system available anywhere. Available in round, square and rectangular, these rings are manufactured from expanded polypropylene, which is renowned for its exceptional strength-to-weight ratio, durability, chemical resistance and long service life under harsh conditions.
One person can install a watertight PRO-RING system in just minutes to within a quarter inch of finished grade. Where concrete rings break and may cause injury, the PRO-RING system eliminates the hazard, helping minimize the risk of injury. A 6” PRO-RING weighs just 14 pounds and stands up to all kinds of physical abuse. The PRO-RING system dramatically speeds manhole installation and repair time. Manhole repair sites can be opened, repaired and closed in one day, reducing overall costs from 20% to 30%, depending on conditions.
800-345-3764
Esri
Esri’s ArcGIS is a comprehensive geospatial platform that enables modern solutions, creates transparency and understanding, and provides real business value. Water and wastewater utilities are extending geographic information system (GIS)-based asset management practices to facilities and vertical infrastructure. They are leveraging ArcGIS to build a robust system of record, expedite facility mapping, and enable 2D and 3D visualization. Out-of-the-box solutions improve maintenance planning, collaboration and integration with various business systems, resulting in data-driven decision making and enhanced operational efficiency.
Christa Campbell
909-369-2925
www.esri.com/en-us/industries/water-utilities/business-areas/facilities-vertical-asset-management
Jensen Infrastructure
Advanced Wastewater Treatment
Precast concrete septic tanks have been the foundation of Jensen Infrastructure since our founding. We still manufacture them today. Our new Advanced Wastewater Treatment System with EZ Treat arrives as a complete solution, ready to install, and with a full line of accessories, including risers, filters, pumps, media packs, distribution boxes, and dispersal options.
With NSF 350 certification, Jensen’s Advanced Treatment System delivers the cleanest effluent available, supporting safe nonpotable reuse such as irrigation. By sourcing tanks, treatment units and all the necessary components from one Jensen source, our commercial and residential property owner customers save time, reduce costs and ensure compatibility across the system. We can deliver and set faster than most other providers. We also offer clear pricing and expert insight with no obligations—built for you, backed by performance and ready for your next spec.
Alex Sunberg
asunberg@jenseninfrastructure.com
775-881-8320
Oldcastle Infrastructure
Oldcastle Infrastructure, a CRH Company and an industry leader in infrastructure solutions, has a suite of digital stormwater design tools targeted at helping engineers, specifiers, regulators and contractors design and assess site-specific stormwater management systems in an effortless and timely manner.
Oldcastle Infrastructure’s design tools offer an entire suite of solutions—from detention and treatment to green infrastructure and deep infiltration—all easily accessible in one dashboard. The design tools technology is self-service and easy to use with drag-and-drop functionality, meaning users can design on their own time, without worrying over time zones and deadlines. This results in documents that can be seamlessly incorporated and easily submitted for project approval. Try it yourself.
www.oldcastleinfrastructure.com/infrastructure-design-solutions
PRESTO GEOSYSTEMS
Design high-performing, eco-friendly GEOWEB Geocell Channels for stormwater conveyance and erosion protection of containment facilities. Protect impervious liners in lagoons, effluent storage ponds, evaporation ponds, and detention basins, preventing degradation and contaminant leakage. With the GEOWEB System, channel and basin designs can be customized for each project with vegetation, aggregate or concrete infill, offering more economical solutions than riprap, gabions or reinforced concrete systems. The GEOWEB system’s high-density polyethylene material is highly resistant to acids and bases so is ideally suited to withstand harsh chemical environments. Presto Geosystems offers complimentary project evaluations, easy specification tools and engineering consultation services.
Katie Bouchard
800-548-3424
Strongwell
Headquartered in Bristol, Va., Strongwell is the leading global innovator in pultruded fiber reinforced polymer (FRP) composites. Operating more than 60 pultrusion machines across four advanced manufacturing facilities in North America, Strongwell engineers corrosion-resistant, lightweight, and low-maintenance solutions that outperform traditional materials in water and wastewater infrastructure.
Designed for long-term reliability in treatment plants, pump stations and collection systems, Strongwell products withstand constant moisture, harsh chemicals and heavy loading, minimizing shutdowns and replacement costs while extending service life. Applications include baffle walls, weirs and scum baffles, tank covers, grating and handrail systems, walkways, ladders, odor-control enclosures and more.
With products ranging from structural shapes, decking and planking, secondary containments and stair towers to storm- and flood-control structures, Strongwell delivers safe, durable and proven FRP systems that help utilities meet performance, safety, and compliance demands. When water and wastewater projects demand strength, resilience, and innovation, Strongwell delivers.
Barry Myers
276-645-8077
Tsurumi Pump
Tsurumi Pump has built its reputation on delivering reliable, long-lasting solutions for the water and wastewater industry. Designed with the same commitment to performance, Tsurumi’s MYCZ chopper pump provides explosion-proof wastewater handling in hazardous environments.
From Tsurumi’s AVANT line, the MYCZ is engineered to excel in municipal, industrial and commercial applications. The MYCZ boasts advanced solids handling as it uses a chopping mechanism suitable for liquids containing large-sized solids. This chopper pump features multichannel open impellers, 3- to 4-inch discharge size selections, and motor sizes up to 20 hp for versatility. Backed by Tsurumi’s global expertise and focus on durability, the MYCZ combines proven safety with performance, helping operators meet standards with confidence.
Yumiko T. Lindgren
888-878-7864
ABB
ABB understands the challenges of specifying and installing variable-frequency drives (VFDs) to control speed/pressure or flow in pump and fan applications. Our experts can help you navigate industry issues such as motor and VFD sizing, installation, cooling, harmonics and IEEE 519, process-control demands and pump/fan protections that help keep your end users’ operations running.
The ACQ580 VFD is optimized for water/wastewater, with built-in features such as intelligent pump control, pump cleaning, cavitation detection and more. The ultra-low harmonic variant solves the industry’s problem with harmonics and utility power quality while offering uninterrupted operations on backup generators that can be sized for the VFD. The ACQ580 4X is for use in extreme environments. Fully sealed, it offers exceptional corrosion resistance to corrosive agents, including biocides, ammonia and chlorine. Ask us about Build America, Buy America-compliant drives.
ABB Drives
800-742-0696
Advanced Valve Technologies
Advanced Valve Technologies (AVT) is known for producing the most lightweight and effective insertion valve in the industry. Insertion valves can be installed on water lines without the need to shut off the water and without affecting local residents and businesses.
The AVT EZ Valve is available in 2” to 24” and is ideal for use with a range of applications from isolating floors in high-rise buildings to creating additional control points on current municipal water networks. The valve uses an integral isolation gate, which, when operated after a slot has been milled across the pipe, allows the end-milling machine to be removed and the resilient wedge installed. This process means the valve can be installed on a live line with no need to shut off the water.
Shawn Petty
shawn.petty@henkel.com
561-516-1953
www.AVTFittings.com
Aqua Membranes
Aqua Membranes manufactures and develops spiral-wound membrane elements using groundbreaking printed spacer technology, replacing traditional feed spacer mesh. By directly printing the feed channel spacer onto the membrane surface, the company significantly enhances membrane performance, delivering the most sustainable, efficient and cost-effective solutions on the market. The technology reduces fouling, saves energy and increases output, optimizing design and operation. With a direct retrofit format, customers experience immediate gains without changing system hardware. Aqua Membranes is headquartered in the United States, with a multidisciplinary team dedicated to solving the world’s water challenges through innovation in membrane design, manufacturing and performance.
Aqueous Vets
Aqueous Vets (AV) is a vertically integrated manufacturer and supplier of water treatment systems that remove per- and polyfluoroalkyl substances and other contaminants of emerging concern. LowPro is AV’s patented pressure-vessel design that reduces the overall height of the vessel with simple mechanical changes like short radius bends and adjusted media outlet placement. This allows for easier permitting within neighborhoods with building height restrictions and installation within existing buildings without incurring additional construction costs. Using up to 25% less energy required by many competitive systems, LowPro vessels offer ease of operation and simpler and less frequent maintenance while providing a more aesthetically pleasing system for residents of municipal communities without affecting media capacity or performance.
Arq
Arq is the only pure-play activated carbon public company dedicated to producing products that reduce environmental liabilities, including per- and polyfluoroalkyl substances (PFAS) or “forever chemicals.” Arq’s U.S.-sourced products help create a cleaner, safer planet by removing harmful contaminants, such as PFAS, through soil remediation, water treatment and air purification. The company’s domestically produced activated carbon products are also proving to be an asset given the current tariff climate.
Arq recently achieved a major milestone with the successful commissioning of its first granular activated carbon (GAC) line in Louisiana. Arq’s GAC meets industry standards for capturing contaminants in water treatment. These domestically sourced and manufactured GAC products—CarbPure GAC, FluxSorb RG and AirLoq—comply with regulatory standards and are optimized for purification.
Ashland Pump
The Ashland Pump Company designs, manufactures and distributes an extensive line of durable, dependable products for use in the plumbing, onsite septic, commercial, industrial and light-municipal markets. Ashland Pump manufactures a complete line of utility, sump, effluent, sewage, grinder and solids-handling pumps along with a complete line of accessories.
All of our products are manufactured in a CSA/CUS-approved ISO9000 facility. Ashland Pump products feature heavy-duty cast-iron construction, professional-duty ball-bearing design and high-efficiency, low-amp-draw continuous-duty-rated motors. The offices and distribution facility are centrally located in Ashland, Ohio. The 130,000-square-foot facility includes offices, a state-of-the-art test lab, assembly and distribution under one roof.
Ryan Fickes
855-281-6830
Assmann
Assmann Corporation of America has a full line of corrosion- and chemical-resistant tanks and containers in capacities ranging from 40 gallons to 12,000 gallons, including chemical feed stations, double-wall tanks and secondary containment. Constructed from virgin high-density crosslink or Food and Drug Administration-compliant linear polyethylene, the tanks and containers are used to store and transport corrosive and hazardous materials. They provide low-temperature impact resistance, are ultraviolet light-stabilized and come in a wide range of capacities and colors. Linear polyethylene tanks are certified to NSF/ANSI Standard 61, and high-density crosslink resin tanks are certified for chemical storage (ISO 9001:2015 certified). The company’s manufacturing facilities are in Garrett, Ind., and Marshall, Texas.
888-357-3181
www.assmann-usa.com
Atlas Copco
Atlas Copco Chopper Pump Range
Atlas Copco’s chopper pumps, primarily engineered for the municipal wastewater sector, provide efficient pump operations with large solids-handling capability of up to 4 inches. The company’s pumps can chop and shred materials that would typically cause clogging. The front wear plate has cutting pockets that shred through sewage and smaller debris, while a cutting claw is designed to cut “stringy” material that could wrap around the impeller. Discover the whole range at www.atlascopco.com/en-us/construction-equipment/products-na/dewatering-pumps-usa/chopper-pumps.
Hunter Powell
hunter.powell@atlascopco.com
803-830-236
shorturl.at/Exd7g
Autodesk
Water
Water shapes our lives and landscapes. However, extreme weather and rising demand pose challenges to both that must be answered. From storm and drought resilience to safe drinking water, whole ecosystems and communities rely on the effectiveness of infrastructure and the work of its designers, engineers, builders and operators.
At Autodesk, we equip the water industry with the solutions needed to make the best decisions possible at every stage of a water asset’s lifecycle. Now cloud-connected and enhanced with artificial intelligence, we can help you find efficiencies, enhance transparency, and deliver resilient outcomes even more consistently, ensuring the future of water is secure for all.
Mya Wheeler
www.autodesk.com/industry/water#contact-us
Badger Meter
Badger Meter is a water technology leader, serving municipal, commercial and industrial customers worldwide. Our mission is to protect the world’s most precious resource. We’ve redefined smart water management with BlueEdge, a customizable suite of products, software and services. Our innovative solutions for measurement, connectivity and communication provide data and insights. We’re committed to our customers’ success and offer best-in-class training and support. Our products span the complete water cycle, including distribution network monitoring, environmental monitoring, customer water usage, drinking water treatment, wastewater treatment, industrial process, HVAC systems and property operations.
Brian Simpkiss
Blue-White
CHEM-FEED M3 – The Future of Chemical Feed
Blue-White’s FLEXFLO M3 peristaltic chemical dosing pump features a bright and responsive 5” display screen that’s as simple to operate as a cell phone, even with work gloves on. The text is easy to read, and icons are quickly recognizable. In addition to legacy communications such as 4-20mA, M3 offers advanced communication protocols, and the superior design of the M3 includes firmware that can be easily field updated. M3’s gentle peristaltic pumping action will not damage delicate fluids, and M3 will not vapor lock or lose prime even when dosing off-gassing chemicals.
FLEXFLO M3 requires near-zero maintenance, resulting in little downtime, and each pump is equipped with Blue-White’s built-in and patented Tube Failure Detection system. TFD noncompatible fluid in the pump head will stop pumping action until the problem is resolved. Other M3 features include 10,000:1 turndown ratio, rated NEMA 4X (IP66) for wash-down and a five-year warranty.
www.blue-white.com/product/m3-peristaltic-metering-pump/
For more than 80 years, Cla-Val has been a leading manufacturer of automatic control valves, serving customers throughout the world in a diverse array of industries, including waterworks, fire protection, fueling, marine, industrial and mining. The company’s commitment to excellence shows in each valve we produce and in the many new products we introduce each year.
Cla-Val’s automatic control valves are designed to improve supply, distribution and treatment system efficiency. Cla-Val also manufactures electronic products that enhance the functionality of our control valves. Cla-Val is a global company with headquarters in Southern California as well as facilities in Canada, Switzerland, France, the United Kingdom and New Zealand.
Concrete Sealants
Since ConSeal’s founding in 1970, we’ve proudly served concrete producers and end-users with a full line of top-quality products. Today, ConSeal manufactures sealants, extruded sealing tapes, primers, wraps, waterstops, coatings, membranes, caulks, mastics, hot-melts, lubricants and specialty admixtures. ConSeal products are used to assemble and seal precast concrete pipes, manholes, box culverts, septic tanks, burial vaults, structures, buildings and components of all types. Additionally, ConSeal products are used with poured-in-place construction joints, concrete bridge spans and decking, roadway surfaces and more. ConSeal manufactures products for HVAC, electrical, petroleum pipe and other applications.
Creative Composites Group
Water and Wastewater Products and Services
As part of our single-source promise, Creative Composites Group (CCG) not only creates FRP tank covers, baffles and clarifier products but our Enduro Field Services team specializes in their installation. Backed by 60 years of experience and more than 1,200 successful installations worldwide, engineered water and wastewater products by Enduro and Creative Pultrusions are designed and manufactured to withstand challenging environmental conditions and enhance treatment plant performance for municipal and industrial applications.
The company’s various fiberglass water and wastewater treatment products are made from high-quality materials that are resistant to corrosion, chemicals and ultraviolet rays. These qualities make them a great option for both new and retrofit projects.
Brian Haygood
713-358-4183
CUES
At CUES, we make it simple for you to manage every aspect of pipeline inspection, rehabilitation, condition assessment and pipe profiling—all from one trusted source. As your one-stop shop, we provide everything you need to keep infrastructure running smoothly, from advanced inspection equipment and powerful software to proven rehabilitation solutions. Our goal is to save you time, reduce costs and eliminate the hassle of working with multiple vendors. With innovative technologies, reliable performance and expert support, we help you quickly identify issues, extend the life of your assets and keep projects on schedule. Whether you’re a municipality, utility, engineer or contractor, you can count on us for complete solutions that keep infrastructure performing at its best—today and in the future.
800-327-7791
Danfoss
Danfoss Drives delivers advanced variable-frequency drive (VFD) and low harmonic solutions that optimize pump, blower and equipment performance across pumping, aeration, and sludge handling. Designed to meet the water and wastewater industry’s demands for efficiency, reliability and regulatory compliance, our VFDs and low harmonic solutions help facilities reduce energy consumption and maintenance costs while ensuring precise process control. With features like condition-based monitoring to enhance system performance and prevent unplanned downtime, a built-in deragging function to minimize clogging and seamless integration with existing equipment, Danfoss solutions provide a smarter, more cost-effective approach to wastewater management.
Jon Harwood
Denso
Denso is a leading manufacturer of innovative corrosion-prevention products and provides tailored solutions for civil and structural engineers. The company specializes in a wide range of products, including petrolatum tapes, pipeline coatings and marine protection systems. Denso ensures the durability and integrity of infrastructure projects. The company’s innovative solutions are designed to withstand harsh environments, making them ideal for bridges, pipelines and other critical structures. Denso’s products are renowned for their durability, ease of application and effectiveness in harsh environments, helping engineers extend the lifespan of their projects while minimizing maintenance costs. Denso continues to advance the field of corrosion prevention, ensuring the longevity and safety of essential assets and supporting engineers in safeguarding essential assets with reliable, high-performance materials.
Ductile Iron Pipe Research Association
The Ductile Iron Pipe Research Association serves as a resource and technical advisor to the water industry. DIPRA also provides representation on standards-making committees and technical research on a variety of applications-based topics. Although DIPRA member companies have different names and locations, they share a common commitment to produce and deliver the finest-quality water and wastewater pipe material in the world, ductile iron pipe, and at the greatest possible value to its purchasers.
Gregg Horn
205-790-8702
Duperon
Internally Fed Rotary Drum Screen
The Duperon Internally Fed Rotary Drum Screen offers adaptive screening technology for municipal and industrial applications with both high flows and high-solids content. It’s designed to manage difficult-to-capture debris and protect sensitive treatment processes, such as membrane bioreactors, from fine particles and fibers, addressing clogging and corrosion challenges.
Key design features include trunnion wheels replaced with stainless steel shoes and ultra-high molecular weight polyethylene; water-lubricated wear strips; a direct-drive system, chain-free and positioned outside of the wet area; quick-release sprayers; and customizable screen types. Panels can be removed for quick debris management, and drum removal isn’t required to perform maintenance and manual clean in place. All routine maintenance is done at chest level without the need for special tools.
989-754-2175
DuPont Water Solutions
DuPont Water Solutions offers technologies that are helping to purify more than 50 million gallons of water every minute in 112 countries across the world. DuPont offers market-leading technologies to address a variety of challenges faced by water treatment municipalities, seawater desalination plants and industrial water users, including the microelectronics industry, through a broad portfolio of membranes, resins and complete systems. The team is also innovating solutions that can help balance the world’s growing water and energy demands, with products that support the production of electricity, lithium and green hydrogen.
Milena Yordanova
EJ
STORMSURGE ACCESS ASSEMBLY
During a major rain or tidal event, the water pressure can be powerful enough to force up and dislodge a manhole cover. This creates a hazard for motorists and pedestrians. The STORMSURGE Access Assembly solves this problem by allowing water to flow. During a storm surge or backflow event, the cover can lift up to 16 degrees, enabling water to flow out and relieve the pressure. The locking arm and hinge restrain the cover and allow it to properly seat itself after the event. Made in the United States, the cover is traffic-rated and exceeds the 40,000-lb proof-loading requirements of AASHTO-M-306.
Joe Lazzati
800-626-4653
Environment One
E/One sewer systems have proven to be an effective method of sewering otherwise difficult land areas, such as flat, wet, rocky and hilly terrain, at a fraction of the cost of gravity sewers. Pressure sewer mains need only to be buried just below the frost line, eliminating the need for the deep trenches often associated with gravity sewers. The small, flexible pipes are also resistant to infiltration and inflow.
At the heart of an E/One Sewer is the grinder pump, developed by Environment One. These units accept household sanitary waste, grind it into a fine slurry and pressurize it to permit transport through small-diameter pipes. E/One Sewer Systems serve nearly 3 million end users daily.
Chris Greco
518-346-6161
Franklin Electric
Pioneer Pump, a brand of Franklin Electric, is proud to announce the launch of a new line of industrial pumps certified to meet the NSF/ANSI/CAN 61 standard, purpose-built for municipal and potable water applications. These pumps are designed to meet the most rigorous clean water standards while delivering the performance and reliability customers have come to expect from Pioneer Pump.
Engineered for safe, high-performance drinking water handling, Pioneer Pump’s NSF/ANSI/CAN 61-certified pumps combine trusted hydraulic performance with clean water compliance. Built with rugged materials and a compact, close-coupled design, they fit tight spaces while standing up to demanding conditions. With Pioneer Pump, you get more than certified equipment—you get a complete clean water solution from a partner you already trust.
Derrik West
marketing@fele.com
www.pioneerpump.com/nsf61
Induron Coatings
Induron Coatings is a 75-year-old family-owned industrial coatings manufacturer that specializes in innovative products for select niche markets that are all considered “critical infrastructure.” We focus on water/wastewater, including treatment, storage and transmission, and power transmission and distribution products—that’s it. If you want paint for other substrates, some of our competitors would love to help you. As the manufacturer of the industry standard for lining uber-corrosive ductile iron sewer pipes, Protecto-401 Ceramic Epoxy, we want to share our technology. Now in its third generation of leadership, Induron’s high-performance coatings serve a range of infrastructure applications broader than our founders ever envisioned. But the core business value of technical integrity continues to drive the company today and tomorrow.
Andy Odorzynski
800-324-9584
ITT Industrial Process
ITT Industrial Process’ extensive portfolio of brands unite to deliver innovative, efficient and sustainable solutions across the entire water and wastewater lifecycle. ITT Goulds Pumps deliver reliable pumping with corrosion- and abrasion-resistant materials, versatile configurations, and wide hydraulic coverage. ITT Engineered Valves ensure precise, durable flow control from potable water to aggressive wastewater environments.
VIDAR, ITT’s cutting-edge embedded variable-speed motor, transforms fluid handling operations with built-in intelligence and energy efficiency even in the most demanding and harsh operations. Rheinhütte Pumpen and Bornemann offer specialized pumps for the most demanding applications, optimizing industrial wastewater and sludge treatment processes. C’treat provides dependable offshore desalination systems, ensuring reliable access to clean water with proven reverse osmosis technology.
ITT Pro Services supports water and wastewater facilities with maintenance, upgrades, and lifecycle management solutions designed to maximize uptime and reduce costs. Together, we’re not just moving water, we’re shaping the future of sustainable industrial water management.
Tiffany Rotz
315-568-7491
Jacobi Carbons
AquaSorb CB1-MW
Jacobi Carbons’ AquaSorb CB1-MW is a high-activity powdered activated carbon specifically manufactured for treating water for human consumption in both municipal and industrial applications. This grade of activated carbon provides a high removal efficiency of a variety of aqueous pollutants, especially organic matter, emerging contaminants, and taste and odor compounds. AquaSorb CB1-MW is manufactured with a closely controlled particle-size distribution to suit all downstream separation techniques. The material is compliant with international standards for activated carbon products used in this application.
215-546-3900
Krystol Internal Membrane
Krystol Internal Membrane (KIM) addresses the critical challenges of water ingress and chemical attack in concrete structures, particularly in water and wastewater environments. Traditional waterproofing methods require frequent maintenance, leading to high costs and downtime. KIM offers a long-term solution by integrating into the concrete, forming crystals that fill capillaries and micro-cracks to prevent water penetration and chemical intrusion. This self-sealing capability ensures any future cracks are sealed automatically, extending the structure’s lifespan and minimizing repair needs. KIM is an ideal, low-maintenance solution for reliable water containment and wastewater treatment.
Elsie Lee
604-324-8280
Master Builders Solutions
Master Builders Solutions is a leader in advanced systems and formulations for sustainable concrete construction, from high-rise buildings to underground projects. Two of our key technologies that support the durability of underground structures and infrastructure are a crystalline capillary waterproofing admixture and fiber reinforcement.
Our innovative waterproofing solution, MasterLife 300L, is a liquid crystalline capillary waterproofing admixture designed to reduce water penetration, seal hairline cracks, and resist both positive and negative hydrostatic pressure. In parallel, MasterFiber reinforcement enhances concrete performance and extends service life. When incorporated into the concrete mixture, MasterFiber helps control cracking caused by plastic and drying shrinkage, improves overall toughness, and enhances the structure’s mechanical properties and durability.
MentorAPM
Every utility asset management program starts with answering three questions:
• What assets do I own?
• Where are they?
• What condition are they in?
These first steps can be overwhelming. We built MentorLens to make it easier. MentorLens dramatically reduces the time and cost of building and keeping your asset inventory up to date while improving the quality and consistency of the information you collect.
With MentorLens you can perform the following tasks:
• Easily create new digital asset records and attach photos
• Automatically transcribe plate and tag data
• Quickly complete level two visual condition assessment with thermography
• Export a report
If you can take photos with your phone and use an app, you can easily manage MentorLens. And you can try it free for 30 days.
Rob Yeager
mentorapm.com/software-solutions/products
Mueller Water Products
Mueller Water Products is a leading manufacturer and marketer of products and solutions used in the transmission, distribution and measurement of water in North America. Since 1857, Mueller has been helping municipalities increase operational efficiencies, improve customer service and prioritize capital spending, demonstrating why Mueller is “where intelligence meets infrastructure.”
From life-saving fire protection to data intelligence, we are committed to developing products and solutions that help cities and water utilities deliver clean, safe drinking water. Our broad product and service portfolio includes engineered valves, fire hydrants, pipe connection and repair products, metering products, leak detection, pipe-condition assessment, pressure-management products and software that provides critical water data.
Mueller is one of the only companies that can fulfill your water system needs from end to end—at the source, at the plant, below the ground, on the street and in the cloud. Built on a solid legacy of innovation, we have the expertise and vision to provide advanced infrastructure and technology solutions for transmitting, distributing, measuring and monitoring water more safely and efficiently than ever before.
Mueller Water Products’ brands include Mueller, Echologics, Hydro Gate, Hydro-Guard, HYMAX, i2O, Jones, Krausz, Mi.Net, Milliken, Pratt, Pratt Industrial, Sentryx, Singer and U.S. Pipe Valve & Hydrant.
800-423-1323
National Precast Concrete Association
National Precast Concrete Association (NPCA) is an international trade association representing more than 900 manufacturers and suppliers in the precast concrete industry. Looking for a precast wastewater manufacturer or product specialist? Visit www.precast.org/find.
NPCA also offers free technical resources, including manuals, brochures, blogs, webinars and standards for wastewater management and grease interceptors at www.precast.org/products/septictanks. For technical support, contact our staff engineers at 800-366-7731. Additional specifier resources are available at www.precast.org/resources/specifiers.
Chris Frederick
800-366-7731
PENETRON
PENETRON ADMIX SB reduces permeability by permanently self-healing microcracks, pores and capillaries. This protects the concrete against water penetration and effects of deterioration, even under high hydrostatic pressure. It provides projects with waterproof and durable concrete that has the ability to self-heal and seal cracks that develop during the concrete’s lifetime.
631-941-9700
With a 100-year design life, zero allowable leakage, the largest flow capacity and fatigue life, resistance to corrosion, freeze/thaw events, wet/dry cycles, ground movements and earthquakes, high-density polyethylene (HDPE) piping is superior for open-cut and trenchless installations. Strong, durable, lightweight and flexible, HDPE piping systems have excellent joint performance and are recognized by the AWWA C901 and C906 and ASTM F1962, F585 & F3508 Standards plus the AWWA M55 and M28 Manuals.
The Municipal & Industrial Division and the Municipal Advisory Board of the Plastics Pipe Institute, Inc., a major North American trade association, have technical information plus field reports to help in the design and the selection of the proper components for your system. Find out more at www.plasticpipe.org/MABPubs or MID@plasticpipe.org.
Proco Products
Proco Products is the global leader in the design and supply of expansion joints for piping/ducting systems. The company prides itself on offering a complete line of products to suit a variety of applications. Some of these products include rubber and molded PTFE expansion joints and braided flexible hose assemblies. Also available are the Series 700 ProFlex rubber duckbill check valves. These valves are commonly used in the water and sewage industry. Check valves are a cost-effective way to control back pressures from sewage treatment plants, outfalls and tidal operations. The company’s main goal is to provide superior service to the demanding marketplace. Quality and service will always be Proco’s highest priority.
800-344-3246
PWTech
Volute DUO
PWTech’s Volute DUO adapts the original dewatering drum concept for more efficient dewatering of difficult sludges. When dewatered, sludges that contain high concentrations of fibrous, inorganic or adhesive material can form a compacted cake that can be difficult to extrude from a traditional screw press. This can lead to clogging and may require reducing cake solids to avoid plugging.
Utilizing twin counter-rotating screws inside a single drum to break up and move feed solids for dewatering, the DUO enables maximum cake solids without compromising performance. Using a separate drive mechanism so the moving rings don’t contact the screws as they move, the DUO design also further reduces wear on the press, resulting in many years of maintenance-free operations. The DUO can be used in virtually all sludge dewatering applications; however, it’s especially effective in applications that would otherwise create plugging or binding in more traditional screw-press designs. Such applications include pulp and paper, raw manure, dredging, land remediation and more.
Chris Hubbard
401-601-0523
Sealing Systems
Sealing Systems manufactures quality products that prevent inflow and infiltration in your sewer systems. Our product line includes manhole chimney seals, joint seals, manhole inserts, rubber risers, cementitious repair material and fast-acting grouts. Key products include the following:
• Flex-Seal—an internal brush-applied urethane chimney seal that has a remarkable 850% elongation
• Infi-Shield Uni-band—a seamless EPDM rubber external seal that provides a permanent, flexible, watertight seal between the manhole casting and the concrete cone
• Gator Wrap—a unique, halogenated-based rubber tape that bonds/stretches to seal joints
• Aqua Seal—a fast-reacting chemical grout able to stop 50-gpm leaks
All products have undergone extensive ASTM testing and are priced to save your clients money due to our low overhead. Our products will save your community money and help municipalities gain effective wastewater capacity. Call for testing results/pricing.
800-478-2054
Seaman
Seaman Corp. is a trusted solutions provider, delivering cutting-edge technology in geomembrane performance for more than 50 years. Our XR Geomembranes, classified as Ethylene Interpolymer Alloy (EIA), are the industry benchmark for strength, durability and stability. XR Geomembrane products have a proven track record and provide superior performance in a wide variety of applications, including potable water applications. Whether used for floating covers, pond liners or division curtains, XR-PW geomembranes are engineered to perform where protection is essential.
Chris Knirk
916-204-1765
Sherwin-Williams Protective & Marine
Sherwin-Williams Protective & Marine prevents corrosion on a wide array of water and wastewater industry assets with long-lasting, sustainable and efficient coating and lining solutions that protect your bottom line. For potable water assets, our SherPlate 600 high-solids epoxy lining meets NSF/ANSI/CAN 600 drinking standard guidelines to ensure safety and quality while delivering maximum corrosion protection.
For severe service wastewater assets, our premier Dura-Plate 6100 100%-solids epoxy lining delivers overall cost savings with improved lifecycles, fast project completions and structural enhancements. Our broad line of coatings and linings can reliably extend the lives of your concrete and steel assets. And no matter the project, we support the entire value chain—from idea to specification to execution—backed by unmatched regional support around the globe.
Sherwin-Williams.com/protective
Siemens Smart Infrastructure
USA – Sirius 3RE47 Enclosed – Powered by SIRIUS 3RW55 Soft Starter
The Siemens SIRIUS 3RW55 soft starter powers our new 3RE47 enclosed system. The comprehensive range of the 3RE47 enclosed soft starters offers the appropriate smart alternative for nearly every starting application, from basic to the most demanding motor requirements. Accelerating mechanical equipment softly improves process performance, reduces wear and tear, and extends equipment life. Furthermore, brownouts, current spikes and other disturbances to the electrical grid are minimized. The 3RE47 product line ships ready for installation and is simple to commission, flexible to integrate, and built to withstand harsh environments. It’s the perfect solution for a wide range of applications. The 3RE47 product line consists of three performance levels: 3RE470 Basic Performance, 3RE471 General Performance and 3RE472 High Performance.
controlproducts.us@siemens.com
470-774-0500
Siemens Smart Infrastructure
3RE48 NEMA Rated Pump Panel
The Siemens 3RE48 NEMA-rated pump panel is similar to the classic Class 87 pump panel. This newest addition to the already extensive line of Siemens pump panels is well suited for irrigation, oil fields and similar pumping applications and is built to withstand the harsh elements of the outdoors. The 3RE48 sports the latest and more advanced contactor technology with the SIRIUS NEMA-rated contactor and is typically priced 15% lower. Not only is it designed, constructed, tested and certified per the same NEMA requirements as that of the Class 87 NEMA contactor, it also includes a three-year warranty.
controlproducts.us@siemens.com
470-774-0500
Solmax
Geomembranes for water, wastewater and potable water containment
Solmax provides a full range of geomembranes for cost-effective water containment. Whether you require thousands of square feet for an open canal or reservoir or smaller prefabricated solutions for treatment structures, we have you covered. Our product line includes high-density polyethylene and linear low-density polyethylene geomembranes. We use high-quality resins and specially formulate our products to exhibit the properties most critical to water-related applications.
In addition, Solmax geomembranes are certified by NSF 61 for potable water containment. They’re durable, allowing for repeated cleaning and disinfecting with no decrease in the liner’s performance. Solmax is the world’s largest geosynthetics manufacturer. Our products have been used worldwide for many years, often paired with concrete, steel, earthen structures and reservoirs.
James Tuttle
704-236-8283
Sprayroq
Sprayroq develops and manufactures the only fast-curing structural and chemical-resistant lining system for the rehabilitation and protection of underground infrastructure in the world. Our trenchless technology solutions extend asset life through corrosion control, abrasion resistance and structural reinforcement. For more than three decades, Sprayroq has provided structural rehabilitation and corrosion protection for water, wastewater and stormwater infrastructure worldwide.
Our technology provides for a quick, cost-effective way to deliver the finest products available in a highly controlled environment for optimal results. Sprayroq products are fast-curing, allowing assets to be returned to service within minutes after lining application. Furthermore, our linings are formulated to withstand the most punishing environments while maintaining maximum effective service life. Our core product, SprayWall, with its incredible structural properties, enhances the longevity of horizontal and vertical structures.
205-957-0020
STRUCTURAL TECHNOLOGIES
STRUCTURAL TECHNOLOGIES develops and integrates repair and renewal products as well as technical-support services with our contracting licensees to provide turnkey value-added solutions to water/wastewater owners, consultants and contractors. Our water/wastewater team is focused on developing solutions to make critical pipelines as well as water and wastewater storage and treatment systems infrastructure stronger and last longer. From investigation to design and through construction, our subject-matter experts support the solution-building process. STRUCTURAL TECHNOLOGIES is recognized as the industry leader in the design, supply and installation of carbon-fiber-reinforced polymer (CFRP) Class IV renewal systems for large-diameter pipelines. For more information, visit www.structuraltechnologies.com and follow STRUCTURAL TECHNOLOGIES and our technical experts on LinkedIn: www.linkedin.com/company/structural-technologies/
Anna Pridmore
714-869-8824
www.structuraltechnologies.com
Vaughan Company
Established in 1960, Vaughan Company is celebrating 65 years of industry-leading innovation and top-quality U.S. manufacturing. Four generations of expertise have brought forth continued technical advancements, strong dedication to outstanding customer service and the inherent ability to provide the most dependable wastewater solutions in the world. Built to last, our pumps and systems are available in a variety of sizes and configurations to meet the unique needs of any operation.
Vaughan pumps and pumping equipment meet all requirements to receive federal aid under the Build America, Buy America Act. Vaughan is global, with more than 40 worldwide issued or pending patents, but no matter where Vaughan products ship, they are still “Made in America.” When you buy Vaughan, you get the best.
888-249-CHOP [2467]
Xerxes
With more than 225,000 tanks installed, Xerxes is the premiere brand for secure, solution-driven underground storage for water, wastewater and fuel. Backed by 45 years of material innovation and manufacturing expertise, Xerxes tanks are corrosion-resistant to both surrounding soil and stored liquids.
Our water and wastewater tanks are made with premium resin and comply with ANSI/AWWA D120. They can be manufactured to comply with other industry standards, including NSF/ANSI 61 (potable water tanks) and IAPMO/ANSI Z1000 (wastewater tanks).
When a site needs emergency supplies of both potable water and fire protection water, an NSF/ANSI 61-listed tank can be configured to store water for both. Our expert teams are standing by to provide customized solutions for your water and wastewater projects.
Xylem
Flygt Mixers
Forty years ago, Flygt introduced a revolutionary low-speed mixer that quickly set the standard for hydraulic efficiency. The mixer’s yellow, backswept propeller blades maximize thrust, reduce energy consumption, and prevent clogging.
Today, Flygt continues to advance its mixing technology to help customers tackle their most challenging mixing problems. Xylem’s experts, leveraging decades of experience in mixing solutions, use computational fluid dynamics modeling, advanced testing facilities and a comprehensive database to identify cost-effective, long-lasting mixing solutions. With more than 300,000 mixers installed globally, Flygt remains at the forefront of the market in providing mixing solutions for a diverse range of applications.
Flygt Adaptive mixers are designed to automatically adjust performance to match actual demand, thus optimizing mixing and avoiding wasted energy.
Jim Fischer
262-278-2310
Xylem
Sensus Cordonel Enables Precise Water Management for Commercial and Industrial Markets
Sensus Cordonel is an innovative ultrasonic commercial and industrial water meter with proven accuracy. The unique flow tube has three measurement channels to capture every drop. Installation is possible in virtually all commercial, industrial or agricultural environments with its intentional U0D0 design, meaning no straight upstream or downstream pipe is required.
Without any moving parts, this robust solid-state device provides a reliable maintenance-free solution during its 20-year battery life. Accurately capture and measure usage, low-flow consumption, temperature and pressure in near real time with Cordonel.
Bill Whittom
636-255-4384
Xypex
Xypex is a global leader in concrete waterproofing, with more than 50 years of innovation and projects in more than 100 countries. Our crystalline technology ensures permanent waterproofing, resistance to extreme hydrostatic pressure, self-healing properties, and enhanced chemical resistance for durable, cost-effective and sustainable concrete structures.
Xypex for Wastewater: Xypex Bio-San and Xypex Megamix II with Bio-San integrate antimicrobial protection into concrete, effectively combating microbial-induced corrosion as well as securing enhanced durability for wastewater and sewage structures.
Xypex for Potable Water: Xypex Admix, Xypex Patch’n Plug, Xypex Concentrate and Xypex Modified are NSF 61 certified, ensuring safe use for potable water structures, whether for new concrete, repairs or rehabilitation.
604-237-5265
Yardney Water Filtration Systems
Yardney Water Filtration Systems is a U.S.-based manufacturer of high-performance filtration solutions for the agriculture, golf, turf, landscape, industrial, commercial and municipal markets worldwide. Featuring built-to-last fabrication and Made in USA quality, Yardney Water Filtration Systems deliver reliable, long-term performance and extended product lifecycles. Yardney’s offerings include filtration systems in either ASME code or non-code construction using technologies such as manual and automatic screen filters, centrifugal sand separators, sand media, multimedia, granular activated carbon, and specialized medias to address contaminants such as iron, manganese, arsenic, and per- and polyfluoroalkyl substances. The company supports a sales network spanning the United States, Mexico, and Europe, bolstered by strategic dealer alliances that ensure a robust global presence.
Zoeller Engineered Products
With decades of experience in the commercial and municipal wastewater industry, Zoeller Engineered Products has established a broad line of pumps ranging from solids-handling pumps (0.5-60 hp), grinder pumps (2-15 hp) and LPS progressing-cavity pumps (1 and 2 hp). Each pump is 100% water tested prior to shipping to ensure the pump will operate upon arrival.
Zoeller can assist in designing and building complete pump package systems for moving wastewater in gravity or pressurized mains. This includes basin packages with valve boxes, special gauges, piping material and ultraviolet protection among other options. Control panels can be built to the specifications requested, or a Pivot Series panel is available on the shelf with multiple built-in features.
800-928-7867
